Commit 66085844 authored by Tim Rozet's avatar Tim Rozet Committed by Gerrit Code Review

Merge "adding openvswitch dependency to installation instructions"

parents 3c78ff47 4cc39deb
......@@ -252,18 +252,29 @@ system to bare metal nodes.
Install Bare Metal Jumphost
---------------------------
1. If your Jumphost does not have CentOS 7 already on it, or you would like to do a fresh
install, then download the Apex bootable ISO <http://artifacts.opnfv.org/> here.
1a. If your Jumphost does not have CentOS 7 already on it, or you would like to do a fresh
install, then download the Apex bootable ISO from OPNFV artifacts <http://artifacts.opnfv.org/>.
2. Boot the ISO off of a USB or other installation media and walk through installing OPNFV CentOS 7.
The ISO comes prepare to be written directly to a USB drive with dd as such:
1b. If your Jump host already has CentOS 7 with libvirt running on it then install the
opnfv-apex RPM from OPNFV artifacts <http://artifacts.opnfv.org/>.
2a. Boot the ISO off of a USB or other installation media and walk through installing OPNFV CentOS 7.
The ISO comes prepared to be written directly to a USB drive with dd as such:
``dd if=opnfv-apex.iso of=/dev/sdX bs=4M``
Replace /dev/sdX with the device assigned to your usb drive. Then select the USB device as the
boot media on your Jumphost
3. After OS is installed login to your Jumphost as root.
2b. Install the RDO Release RPM and the opnfv-apex RPM:
``sudo yum install -y https://www.rdoproject.org/repos/rdo-release.rpm opnfv-apex-{version}.rpm``
The RDO Project release repository is needed to install OpenVSwitch, which is a dependency of
opnfv-apex. If you do not have external connectivity to use this repository you need to download
the OpenVSwitch RPM from the RDO Project repositories and install it with the opnfv-apex RPM.
3. After the operating system and the opnfv-apex RPM are installed, login to your Jumphost as root.
4. Configure IP addresses on the interfaces that you have selected as your networks.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment