Added skels for gupnp module, does absolutely nothing yet

git-svn-id: https://svn.o-hand.com/repos/gupnp/gupnp@140 d8cb91d7-bff9-0310-92b9-80b65e4482b2

AUTHORS

+Jorn Baayen <jorn@openedhand.com>

INSTALL

+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PREFIX', the package will
+use PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+

Makefile.am

+SUBDIRS = libgupnp tests po doc
+
+pkgconfig_DATA= gupnp-1.0.pc
+pkgconfigdir = $(libdir)/pkgconfig
+
+EXTRA_DIST = gupnp-1.0.pc.in
+
+# Extra clean files so that maintainer-clean removes *everything*
+MAINTAINERCLEANFILES = aclocal.m4 compile config.guess config.sub configure depcomp install-sh ltmain.sh Makefile.in missing config.h.in

autogen.sh

+#! /bin/sh
+gtkdocize || exit 1
+autoreconf -v --install || exit 1
+glib-gettextize --force --copy || exit 1
+./configure --enable-maintainer-mode --enable-debug "$@"

configure.ac

+AC_PREREQ(2.53)
+AC_INIT(gupnp, 0.1, http://projects.o-hand.com/gupnp)
+AM_INIT_AUTOMAKE()
+AC_CONFIG_SRCDIR(libgupnp/gupnp-context.c)
+AM_CONFIG_HEADER(config.h)
+AM_MAINTAINER_MODE
+
+AC_ISC_POSIX
+AC_PROG_CC
+AC_STDC_HEADERS
+AC_PROG_LIBTOOL
+
+PKG_CHECK_MODULES(LIBGUPNP, gobject-2.0 >= 2.9.1 gssdp-1.0 libsoup-2.2)
+
+# glib-genmarshal
+GLIB_GENMARSHAL=`pkg-config --variable=glib_genmarshal glib-2.0`
+AC_SUBST(GLIB_GENMARSHAL)
+
+# Debugging
+AC_ARG_ENABLE(debug,
+	[  --enable-debug          enable debugging],,
+        enable_debug=no)
+if test "x$enable_debug" = "xyes"; then
+        CFLAGS="$CFLAGS -g -Wall -Werror"
+fi
+
+# Gettext
+GETTEXT_PACKAGE=libgupnp
+AC_SUBST(GETTEXT_PACKAGE)
+AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE, ["$GETTEXT_PACKAGE"], 
+  [Define the gettext package to be used])
+
+ALL_LINGUAS=""
+AM_GLIB_GNU_GETTEXT
+AM_GLIB_DEFINE_LOCALEDIR([LOCALEDIR])
+
+GTK_DOC_CHECK([1.0])
+
+AC_OUTPUT([
+Makefile
+libgupnp/Makefile
+tests/Makefile
+po/Makefile.in
+po/Makefile
+doc/Makefile
+gupnp-1.0.pc
+])

doc/Makefile.am

+## Process this file with automake to produce Makefile.in
+
+# We require automake 1.6 at least.
+AUTOMAKE_OPTIONS = 1.6
+
+# This is a blank Makefile.am for using gtk-doc.
+# Copy this to your project's API docs directory and modify the variables to
+# suit your project. See the GTK+ Makefiles in gtk+/docs/reference for examples
+# of using the various options.
+
+# The name of the module, e.g. 'glib'.
+DOC_MODULE=gupnp
+
+# The top-level SGML file. You can change this if you want to.
+DOC_MAIN_SGML_FILE=$(DOC_MODULE)-docs.sgml
+
+# The directory containing the source code. Relative to $(srcdir).
+# gtk-doc will search all .c & .h files beneath here for inline comments
+# documenting the functions and macros.
+# e.g. DOC_SOURCE_DIR=../../../gtk
+DOC_SOURCE_DIR=../libgupnp
+
+# Extra options to pass to gtkdoc-scangobj. Not normally needed.
+SCANGOBJ_OPTIONS=
+
+# Extra options to supply to gtkdoc-scan.
+# e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED" 
+SCAN_OPTIONS=
+
+# Extra options to supply to gtkdoc-mkdb.
+# e.g. MKDB_OPTIONS=--sgml-mode --output-format=xml
+MKDB_OPTIONS=--sgml-mode --output-format=xml
+
+# Extra options to supply to gtkdoc-mktmpl
+# e.g. MKTMPL_OPTIONS=--only-section-tmpl
+MKTMPL_OPTIONS=
+
+# Extra options to supply to gtkdoc-fixref. Not normally needed.
+# e.g. FIXXREF_OPTIONS=--extra-dir=../gdk-pixbuf/html --extra-dir=../gdk/html
+FIXXREF_OPTIONS=
+
+# Used for dependencies. The docs will be rebuilt if any of these change.
+# e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h
+# e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c
+HFILE_GLOB=$(top_srcdir)/libgupnp/*.h
+CFILE_GLOB=$(top_srcdir)/libgupnp/*.c
+
+# Header files to ignore when scanning.
+# e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h
+IGNORE_HFILES=
+
+# Images to copy into HTML directory.
+# e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png
+HTML_IMAGES=
+
+# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE).
+# e.g. content_files=running.sgml building.sgml changes-2.0.sgml
+content_files=
+
+# SGML files where gtk-doc abbrevations (#GtkWidget) are expanded
+# These files must be listed here *and* in content_files
+# e.g. expand_content_files=running.sgml
+expand_content_files=
+
+# CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library.
+# Only needed if you are using gtkdoc-scangobj to dynamically query widget
+# signals and properties.
+# e.g. INCLUDES=-I$(top_srcdir) -I$(top_builddir) $(GTK_DEBUG_FLAGS)
+# e.g. GTKDOC_LIBS=$(top_builddir)/gtk/$(gtktargetlib)
+INCLUDES=-I$(top_srcdir) $(LIBGUPNP_CFLAGS)
+GTKDOC_LIBS=$(top_builddir)/libgupnp/libgupnp-1.0.la $(LIBGUPNP_LIBS)
+
+# This includes the standard gtk-doc make rules, copied by gtkdocize.
+include $(top_srcdir)/gtk-doc.make
+
+# Other files to distribute
+# e.g. EXTRA_DIST += version.xml.in
+EXTRA_DIST += 

gupnp-1.0.pc.in

+prefix=@prefix@
+exec_prefix=${prefix}
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+
+Name: gupnp-1.0
+Description: GObject-based UPnP library
+Version: @VERSION@
+Libs: -L${libdir} -lgupnp-1.0
+Cflags: -I${includedir}/gupnp-1.0
+Requires: gobject-2.0 gssdp-1.0 libsoup-2.2

libgupnp/Makefile.am

+AM_CFLAGS = $(LIBGUPNP_CFLAGS) -I$(top_srcdir)
+
+libgupnpincdir = $(includedir)/gupnp-1.0/libgupnp
+
+lib_LTLIBRARIES = libgupnp-1.0.la
+
+libgupnpinc_HEADERS = 	gupnp-context.h		 \
+			gupnp.h
+
+libgupnp_1_0_la_SOURCES = gupnp-context.c
+
+libgupnp_1_0_la_LIBADD = $(LIBGUPNP_LIBS)
+
+CLEANFILES = $(BUILT_SOURCES)
+DISTCLEANFILES = $(BUILT_SOURCES)
+MAINTAINERCLEANFILES = Makefile.in $(BUILT_SOURCES)

libgupnp/gupnp.h

+/* 
+ * Copyright (C) 2006 OpenedHand Ltd.
+ *
+ * Author: Jorn Baayen <jorn@openedhand.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Library General Public License for more details.
+ *
+ * You should have received a copy of the GNU Library General Public
+ * License along with this library; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ */
+

po/Makefile.in.in

+# Makefile for program source directory in GNU NLS utilities package.
+# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+#
+# - Modified by Owen Taylor <otaylor@redhat.com> to use GETTEXT_PACKAGE
+#   instead of PACKAGE and to look for po2tbl in ./ not in intl/
+#
+# - Modified by jacob berkman <jacob@ximian.com> to install
+#   Makefile.in.in and po2tbl.sed.in for use with glib-gettextize
+
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datadir = @datadir@
+libdir = @libdir@
+localedir = $(libdir)/locale
+gnulocaledir = $(datadir)/locale
+gettextsrcdir = $(datadir)/glib-2.0/gettext/po
+subdir = po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+MKINSTALLDIRS = $(top_srcdir)/@MKINSTALLDIRS@
+
+CC = @CC@
+GENCAT = @GENCAT@
+GMSGFMT = @GMSGFMT@
+MSGFMT = @MSGFMT@
+XGETTEXT = @XGETTEXT@
+MSGMERGE = msgmerge
+
+DEFS = @DEFS@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+
+INCLUDES = -I.. -I$(top_srcdir)/intl
+
+COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
+
+SOURCES = 
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+DISTFILES = ChangeLog Makefile.in.in POTFILES.in $(GETTEXT_PACKAGE).pot \
+$(POFILES) $(GMOFILES) $(SOURCES)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+INSTOBJEXT = @INSTOBJEXT@
+
+.SUFFIXES:
+.SUFFIXES: .c .o .po .pox .gmo .mo .msg .cat
+
+.c.o:
+	$(COMPILE) $<
+
+.po.pox:
+	$(MAKE) $(GETTEXT_PACKAGE).pot
+	$(MSGMERGE) $< $(srcdir)/$(GETTEXT_PACKAGE).pot -o $*.pox
+
+.po.mo:
+	$(MSGFMT) -o $@ $<
+
+.po.gmo:
+	file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+	  && rm -f $$file && $(GMSGFMT) -c -o $$file $<
+
+.po.cat:
+	sed -f ../intl/po2msg.sed < $< > $*.msg \
+	  && rm -f $@ && $(GENCAT) $@ $*.msg
+
+
+all: all-@USE_NLS@
+
+all-yes: $(CATALOGS)
+all-no:
+
+$(srcdir)/$(GETTEXT_PACKAGE).pot: $(POTFILES)
+	$(XGETTEXT) --default-domain=$(GETTEXT_PACKAGE) --directory=$(top_srcdir) \
+	  --add-comments --keyword=_ --keyword=N_ \
+          --flag=g_strdup_printf:1:c-format \
+          --flag=g_string_printf:2:c-format \
+          --flag=g_string_append_printf:2:c-format \
+          --flag=g_error_new:3:c-format \
+          --flag=g_set_error:4:c-format \
+          --flag=g_markup_printf_escaped:1:c-format \
+          --flag=g_log:3:c-format \
+          --flag=g_print:1:c-format \
+          --flag=g_printerr:1:c-format \
+          --flag=g_printf:1:c-format \
+          --flag=g_fprintf:2:c-format \
+          --flag=g_sprintf:2:c-format \
+          --flag=g_snprintf:3:c-format \
+          --flag=g_scanner_error:2:c-format \
+          --flag=g_scanner_warn:2:c-format \
+	  --files-from=$(srcdir)/POTFILES.in \
+	&& test ! -f $(GETTEXT_PACKAGE).po \
+	   || ( rm -f $(srcdir)/$(GETTEXT_PACKAGE).pot \
+		&& mv $(GETTEXT_PACKAGE).po $(srcdir)/$(GETTEXT_PACKAGE).pot )
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+install-data-no: all
+install-data-yes: all
+	if test -r "$(MKINSTALLDIRS)"; then \
+	  $(MKINSTALLDIRS) $(DESTDIR)$(datadir); \
+	else \
+	  $(SHELL) $(top_srcdir)/mkinstalldirs $(DESTDIR)$(datadir); \
+	fi
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  case "$$cat" in \
+	    *.gmo) destdir=$(gnulocaledir);; \
+	    *)     destdir=$(localedir);; \
+	  esac; \
+	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+	  dir=$(DESTDIR)$$destdir/$$lang/LC_MESSAGES; \
+	  if test -r "$(MKINSTALLDIRS)"; then \
+	    $(MKINSTALLDIRS) $$dir; \
+	  else \
+	    $(SHELL) $(top_srcdir)/mkinstalldirs $$dir; \
+	  fi; \
+	  if test -r $$cat; then \
+	    $(INSTALL_DATA) $$cat $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
+	    echo "installing $$cat as $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT)"; \
+	  else \
+	    $(INSTALL_DATA) $(srcdir)/$$cat $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
+	    echo "installing $(srcdir)/$$cat as" \
+		 "$$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT)"; \
+	  fi; \
+	  if test -r $$cat.m; then \
+	    $(INSTALL_DATA) $$cat.m $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
+	    echo "installing $$cat.m as $$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m"; \
+	  else \
+	    if test -r $(srcdir)/$$cat.m ; then \
+	      $(INSTALL_DATA) $(srcdir)/$$cat.m \
+		$$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
+	      echo "installing $(srcdir)/$$cat as" \
+		   "$$dir/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m"; \
+	    else \
+	      true; \
+	    fi; \
+	  fi; \
+	done
+	if test "$(PACKAGE)" = "glib"; then \
+	  if test -r "$(MKINSTALLDIRS)"; then \
+	    $(MKINSTALLDIRS) $(DESTDIR)$(gettextsrcdir); \
+	  else \
+	    $(SHELL) $(top_srcdir)/mkinstalldirs $(DESTDIR)$(gettextsrcdir); \
+	  fi; \
+	  $(INSTALL_DATA) $(srcdir)/Makefile.in.in \
+			  $(DESTDIR)$(gettextsrcdir)/Makefile.in.in; \
+	else \
+	  : ; \
+	fi
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+	  rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
+	  rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
+	  rm -f $(DESTDIR)$(gnulocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT); \
+	  rm -f $(DESTDIR)$(gnulocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE)$(INSTOBJEXT).m; \
+	done
+	if test "$(PACKAGE)" = "glib"; then \
+	  rm -f $(DESTDIR)$(gettextsrcdir)/Makefile.in.in; \
+	fi
+
+check: all
+
+dvi info tags TAGS ID:
+
+mostlyclean:
+	rm -f core core.* *.pox $(GETTEXT_PACKAGE).po *.old.po cat-id-tbl.tmp
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES *.mo *.msg *.cat *.cat.m
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(GMOFILES)
+
+distdir = ../$(GETTEXT_PACKAGE)-$(VERSION)/$(subdir)
+dist distdir: update-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	for file in $$dists; do \
+	  ln $(srcdir)/$$file $(distdir) 2> /dev/null \
+	    || cp -p $(srcdir)/$$file $(distdir); \
+	done
+
+update-po: Makefile
+	$(MAKE) $(GETTEXT_PACKAGE).pot
+	tmpdir=`pwd`; \
+	cd $(srcdir); \
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
+	  echo "$$lang:"; \
+	  if $(MSGMERGE) $$lang.po $(GETTEXT_PACKAGE).pot -o $$tmpdir/$$lang.new.po; then \
+	    if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	      rm -f $$tmpdir/$$lang.new.po; \
+            else \
+	      if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	        :; \
+	      else \
+	        echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	        rm -f $$tmpdir/$$lang.new.po; \
+	        exit 1; \
+	      fi; \
+	    fi; \
+	  else \
+	    echo "msgmerge for $$cat failed!"; \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  fi; \
+	done
+
+# POTFILES is created from POTFILES.in by stripping comments, empty lines
+# and Intltool tags (enclosed in square brackets), and appending a full
+# relative path to them
+POTFILES: POTFILES.in
+	( if test 'x$(srcdir)' != 'x.'; then \
+	    posrcprefix='$(top_srcdir)/'; \
+	  else \
+	    posrcprefix="../"; \
+	  fi; \
+	  rm -f $@-t $@ \
+	    && (sed -e '/^#/d' 						\
+		    -e "s/^\[.*\] +//" 					\
+		    -e '/^[ 	]*$$/d' 				\
+		    -e "s@.*@	$$posrcprefix& \\\\@" < $(srcdir)/$@.in	\
+		| sed -e '$$s/\\$$//') > $@-t \
+	    && chmod a-w $@-t \
+	    && mv $@-t $@ )
+
+Makefile: Makefile.in.in ../config.status POTFILES
+	cd .. \
+	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
+	       $(SHELL) ./config.status
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

tests/Makefile.am

+AM_CFLAGS = $(LIBGUPNP_CFLAGS) -I$(top_srcdir)
+
+CLEANFILES = $(BUILT_SOURCES)
+DISTCLEANFILES = $(BUILT_SOURCES)
+MAINTAINERCLEANFILES = Makefile.in $(BUILT_SOURCES)